Email: info@brictec.com
Mobile: 0086-15191460534
Skype:brictec08
 
Company
About us
Location
Tech & News
History
Management
Branch
Profile video
Tech & News
Waste-heat pipe insulation
Source:   Author:  Release time:2016-03-14 9:47:55  Clicks:399
The control methods of heat-loss as follows:
Cut the rock wool felt into blocks according to the specification of wast-heat pipe, and lay them uniformly. The vertical and cross joints should be remained to the top of pipe, the joint length should be more than 50 cm; the cross joints should be connected closely, and then tile up the rock wool by galvanized iron wire. The gap between each wire line should be 20 cm. At last, use the dense glass fiber cloth to screw wind for outside, the joint length should more than 5cm, then tile it up firmly in every 50 cm by galvanized iron wire. Keep some space between the rock wool at the expansion joints, so that the pipe can expand and draw flexibly.
ADD:Rm.401, ZTE Industry Park,South Tangyan Road,Xi'an,China
Mobile:0086-15191460534 Phone:0086-29-89183545
Fax:0086-29-89193424 Email:info@brictec.com